Article

Clinical Utility of Realtime Three-dimensional Echocardiography - A New and Emerging Standard

Register or Login to View PDF Permissions
Permissions× For commercial reprint enquiries please contact Springer Healthcare: ReprintsWarehouse@springernature.com.

For permissions and non-commercial reprint enquiries, please visit Copyright.com to start a request.

For author reprints, please email rob.barclay@radcliffe-group.com.
Average (ratings)
No ratings
Your rating
Copyright Statement:

The copyright in this work belongs to Radcliffe Medical Media. Only articles clearly marked with the CC BY-NC logo are published with the Creative Commons by Attribution Licence. The CC BY-NC option was not available for Radcliffe journals before 1 January 2019. Articles marked ‘Open Access’ but not marked ‘CC BY-NC’ are made freely accessible at the time of publication but are subject to standard copyright law regarding reproduction and distribution. Permission is required for reuse of this content.

Cardiac imaging has become fully integrated in the management of patients, with echocardiography being the most widely used modality. Two-dimensional echocardiography (2DE) offers a detailed assessment of ventricular function, valvular pathology, and hemodynamics, but its comprehensiveness is limited by the fact that images represent a single plane, and may thus inadequately represent a heart whose function is not uniform. For example, when evaluating 2-D images to calculate ventricular volumes, geometrical assumptions need to be made regarding the ventricular shape, which may not be valid in the presence of regional wall motion abnormalities. More than 15 years ago, 3DE was developed to provide a more accurate assessment of ventricular volume, mass, and function to enhance the ability to assess the spatial relations between cardiac structures and provide a more complete view of the valves. While multiple studies demonstrated the advantages of 3DE, it too had several limitations. 3-D images were actually reconstructed from multiplanar 2-D images taken over several cardiac cycles. This increased the risk of introducing artifact from patient respiration or motion. Analysis was performed off-line and required tedious manual tracing of endocardial borders. In addition, limited computer technology caused slow data processing. As a result, 3DE remained a research tool that was not used widely in the clinical arena.

The past years have seen significant developments in transducer technology, allowing pyramidal shaped blocks to be acquired in realtime. It is now possible to image an entire ventricle or valve and analyze it online, thus obviating the need for complicated and time-consuming reconstructions. Advances in computer technology have also contributed to streamlining and expediting data analysis. Realtime 3-D echocardiography (RT3DE) has thus greatly enhanced the potential clinical utility for the evaluation of left ventricular (LV) and valvular function. This article examines the technological improvements in RT3DE and the evidence to support its routine use in the clinical setting.

RT3DE Technology

Early models of RT3DE transducers used only 256 elements, which did not fire simultaneously, resulting in an image quality that was often inferior to that of 2DE. Displayed images still consisted of computer-generated 2-D cut planes obtained from the 3-D dataset, and the size of the pyramidal scan volume was incapable of accommodating larger ventricles.

The recently developed matrix array transducer uses 3,000 simultaneously firing elements, and, as a result, contrast resolution and penetration has improved.1 In addition, rendered 3-D images can now be displayed online.The size of the pyramidal volumes and the method in which they are acquired depend on what structure is being imaged (see Figure 1). To capture the entire LV volume, four wedges of 93┬║ x 20┬║ are obtained over four cardiac cycles during a breath hold. Each sub-volume is triggered to the R wave of every other beat to allow sufficient time for the probe to recalibrate and each sub-volume to be stored. The ability to image patients with arrhythmias or dyspnea is therefore limited. However, if the area of interest is a valve, a more narrow pyramid of data can be magnified, without the need for respiratory or cardiac gating.

Evaluation of LV Parameters

Assessment of LV volume, ejection fraction (EF), and mass has become a fundamental component of decision-making regarding the risk for future cardiac events and the timing of interventions such as valvular surgery. While magnetic resonance imaging (MRI) has been the gold standard for determining LV parameters, factors such as the relatively high cost and long examination time with multiple breath-holds make this modality less than ideal for serial examinations. 2DE has traditionally been used as a more feasible alternative, but the ability to obtain accurate values is dependent on the ability to acquire non-foreshortened long-axis images from apical acoustic windows. In many patients, this is compromised due to limited access to the true ventricular apex. Analysis of 2DE can be problematic, because objective measurements are often substituted with 'eye-balledÔÇÖ estimates, which are subjective and experience-dependent. Attempts at quantitative analysis by using manual tracings of 2-D images are also limited, because they rely on geometric assumptions of chamber size and shape, which may not apply to patients with abnormalities such as aneurysms or hypertrophy.

Recent studies using both animal models and human subjects have confirmed that RT3DE can both accurately and reproducibly evaluate LV parameters.2-4 RT3DE can image the entire ventricle, without forcing the reader to make assumptions regarding size and shape or subjectively select views for analysis (see Figure 2). As a result, when compared with MRI,RT3DE more closely approximates volume than 2DE,2 although RT3DE continues to slightly underestimate end-diastolic volumes (EDV) and end-systolic volumes (ESV).

Possible explanations for this, albeit small, discrepancy between RT3DE and MRI include the different tracing techniques used (long-axis cross sections with RT3DE versus short-axis slices for MRI) and the fact that apical definition is less reliable with both methods. An earlier study evaluating an in vitro model and patients showed that, even in the presence of ventricular aneurysms, there was an excellent correlation with both actual volumes (in the in vitro model) and MRI (in patients).5

As with 2DE, it is possible to use contrast with RT3DE to improve visualization of endocardial borders in patients with poor acoustic windows, particularly at the apex. However, one study showed that when contrast was used with RT3DE and continuous imaging, agreement with MRI measurements actually decreased. This was probably because of increased bubble destruction caused by the high density of scan lines required to generate a 3-D data set.2 A subsequent study used dual triggering at end-systole and end-diastole to overcome this limitation, resulting in more accurate values for ESV, but it continued to slightly underestimate EDV.6

RT3DE can also be applied to the evaluation of ventricular mass among patients with a broad range of cardiac diseases, including coronary artery disease, dilated cardiomyopathy, and aortic abnormalities.RT3DE allows the operator to find the true non-foreshortened 2-D cut planes from which to perform measurements and thus minimize errors, which is particularly advantageous in patients with irregularly shaped hearts. This concept was illustrated in one study of LV mass among a group of patients with various cardiac diseases, in which the LV long-axis dimensions were significantly larger with RT3DE compared with 2DE.7

Analysis of LV parameters with RT3DE involves using semi-automated border detection, which significantly reduces the amount of time required to analyze each set of images. Caiani et al. found that analysis took, on average, five minutes per dataset,2 but this time was extended with suboptimal image quality, while Kuhl et al. reported a time of 12 minutes for RT3DE and 14 minutes for MRI.4 Importantly, it appears that accuracy is not sacrificed when using the semi-automatic method. Kuhl et al. found no significant differences between EDV, ESV, and EF values obtained by manual tracing and the semi-automated border detection.

Once a full-volume assessment of the ventricle is complete, can be applied that information to an analysis of wall motion. When trying to determine the presence and degree of wall motion abnormalities, 2DE relies primarily on the readerÔÇÖs subjective interpretation. In contrast, recent data has shown that RT3DE allows for a more quantitative approach, incorporating volumetric information and how it changes over time. By using the semi-automated border detection to generate a cast of the endocardium, it is possible to quantify the precise volume of different ventricular segments throughout the cardiac cycle.3,8

Stress Testing

2DE has served as an extremely useful tool for the evaluation of both abnormal wall motion and myocardial perfusion. However, there are important shortcomings that could be overcome with RT3DE. With 2DE, several views are obtained from more than one acoustic window to assess the necessary segments, but adjacent areas of regional dysfunction may be overlooked. By imaging the entire LV volume and allowing for visualization in multiple planes, RT3DE could, theoretically, provide a better assessment of at-risk or infarcted myocardium.

The advantages of RT3DE readily apply to stress echocardiography, where it provides not only a potentially more accurate assessment of wall motion, but also allows for rapid acquisition of images. When compared with 2DE,RT3DE has been shown to detect a higher proportion of patients with coronary artery disease.9 The improved sensitivity of RT3DE may be, in part, due to the fact that, during stress testing, there is little time to capture all of the necessary images before the heart rate returns to baseline, and stress-induced abnormalities disappear. RT3DE has the advantage of faster acquisition, because there is no longer the need to acquire views from several different transducer positions.

RT3DE can be used in two ways during stress testing. The first method is using bi-plane imaging, which allows visualization of two orthogonal planes simultaneously in a split-screen display.10 The primary image, an apical four-chamber view, is first optimized similarly to that of 2DE, and then the secondary image plane can be adjusted by the bi-plane angle being rotated without the transducer having to be moved. Investigators have shown that the time required to obtain all of the required views is decreased, thus allowing for acquisition closer to peak heart rate.9,10 This makes it an ideal technique for exercise stress testing, where the need for rapid acquisition is particularly pronounced. However, whether this technique will improve the sensitivity and specificity of stress testing has yet to be determined.

An alternative method applied to dobutamine stress echocardiography (DSE) involves the acquisition of full-volume data sets at every stage of the examination.11 The images are then automatically cropped off-line to visualize all segments. The application of RT3DE to stress testing is still limited by several technological factors. For instance, the matrix array transducer causes increased bubble destruction when contrast is used to improve the endocardial delineation, leading to decreased visualization of the apical segments. In addition, the large footprint of the matrix array transducer makes it difficult to fit in the intercostal space of smaller patients. Lastly, when the four wedge-shaped sub-volumes are combined to produce a representation of the entire ventricle, stitch artifacts can result in false-positive interpretations due to the erroneous diagnosis of inhomogeneous contraction and relaxation patterns.

Valvular Function

When characterizing the structure of a valve, one would ideally utilize a method that examined the valve directly, and was not affected by other factors, such as hemodynamics. Reliable measurements of valve area and function are crucial, given that they help to determine when to recommend operative repair. Most of the studies comparing 2DE and RT3DE focus on mitral valve pathology. With 2DE, planimetry of the mitral valve is the most direct measurement of the valve orifice; however, planimetry can only be obtained in the parasternal view. Restriction to one view in patients with mitral stenosis can make correct plane orientation difficult, because as the disease progresses, the valve develops a more funnel-like shape. Depending on the geometry of the orifice, even a small deviation from the optimal plane can lead to an overestimation of mitral valve area (MVA) of up to 60%.12 RT3DE allows the operator to rotate the image onlineÔÇöregardless of the acoustic window in which it was acquiredÔÇöto choose the ideal plane for measurement of the MVA. In patients with mitral stenosis, RT3DE has been shown to have the best agreement with invasively measured MVA when compared with planimetry and continuous-wave Doppler methods.13 The ability to evaluate the entire valve apparatus without relying on hemodynamics becomes especially important in patients who have had percutaneous mitral valvuloplasty (PMV). Following valvuloplasty, the mitral orifice often becomes irregular, many patients develop an atrial septal defect, and rapid changes occur in left atrial and ventricular compliance post-repair.14 It is important to note that almost half of the patients in these studies were in atrial fibrillation. While this does not appear to have affected image quality, it did lengthen the acquisition time.

A 3-D image of the mitral valve also becomes valuable when evaluating patients with mitral regurgitation (MR) from ischemic heart disease or dilated cardiomyopathy. Currently, surgical treatment involves annular size reduction with annuloplasty ring and, more recently, with chordal cutting surgery, which is done with the goal of decreasing tethering of the mitral leaflet into the LV. The degree of geometric changes of the leaflets depends, in part, on the cause of the MR, but can vary from patient to patient, even when the etiology of the MR is the same. The true shape of the mitral valve apparatus can be difficult to measure in 2-D, because at baseline, the mitral valve is curved and the annulus is saddle-shaped. When MR develops, there can be significant tenting of the valve that distorts its shape. Investigators have used RT3DE to further characterize how the geometry of the mitral valve and annulus relates to the different etiologies of systolic dysfunction and displacement of the papillary muscles.15,16 More detailed knowledge about the exact deformities of patientsÔÇÖ valves could potentially help to guide surgical treatment.

LV Asynchrony

As the therapeutic options for patients with LV dysfunction progress, it has become increasingly important to quantify the degree of ventricular asynchrony. Currently, 2DE and tissue Doppler are the most commonly used methods. However, with 2DE, only two opposing walls can be assessed at one time. Tissue Doppler is limited by low spatial resolution and the need for multiple acquisitions to image all segments, which are thus obtained sequentially rather than simultaneously. Recent studies suggest that RT3DE provides a more accurate assessment of mechanical asynchrony, because it incorporates the combined effect of radial, circumferential, and longitudinal contraction. Precise measurements are made by using the points along the endocardial border to calculate the time required to attain minimum regional volume.3,8,17 In ventricles that contract normally, the time taken to achieve minimal volume is more uniform, whereas in patients with significant asynchrony, there are large deviations between segments (see Figure 3). While this method has only been examined with small numbers of patients, it has the potential to enhance the decision-making about who would benefit most from interventions such as cardiac resynchronization therapy (CRT). At present, patients must have a prolonged QRS to be considered for CRT.

However, RT3DE demonstrated significant asynchrony in patients with a normal QRS width.17 In the patients who did receive CRT, those who achieved the greatest response had also exhibited the most pronounced asynchrony before biventricular pacing with RT3DE.8,17

Future Directions

With continued improvements in transducer technology,RT3DE will have wider applications in the clinical setting. In the future, transducer electronics will be miniaturized to fit in a transesophageal probe, thus expanding the role of RT3DE intra-operatively. RT3DE used during a transesophageal echo would provide images of the left atrial and ventricular side of the mitral valve that could help to guide decisions about how to repair a damaged valve. In addition, RT3DE could enhance visualization of the pulmonic vein entry site into the left atrium and thus improve the precision of ablation for atrial fibrillation.

Preliminary studies suggest that RT3DE could also become more useful when performing perfusion studies. Data with animal models confirmed that RT3DE, with the use of contrast, could accurately quantify the actual mass of underperfused myocardium and allow for easy visualization of hypoperfusion in the setting of acute coronary occlusion.18,19 One recent study conducted in a small group of normal human subjects demonstrated the feasibility of using RT3DE to measure changes in perfusion.20 This technique could offer the advantage of requiring only one contrast infusion to visualize all segments, and therefore significantly decrease acquisition time.

RT3DE has the potential to become more integrated with 2DE, because it adds the ability to diagnose abnormalities with more certainty and perform quantification in a more accurate and reliable manner.

References

  1. Sugeng L,Weinert L, Lang R M, ÔÇ£Left ventricular assessment using real time three dimensional echocardiographyÔÇØ, Heart (2003);89: pp. iii29-iii36.
  2. Caiani E G, Corsi C, Zamorano J et al.,ÔÇ£Improved semiautomated quantification of left ventricular volumes and ejection fraction using 3-dimensional echocardiography with a full matrix-array transducer: comparison with magnetic resonance imagingÔÇØ, J.Am. Soc. Echocardiogr. (2005);18: pp. 779-788.
  3. Corsi C, Lang R M,Veronesi F,Weinert L, Caiani E G, MacEneaney P, Lamberti C, Mor-Avi V,ÔÇ£Volumetric quantification of global and regional left ventricular function from real-time three-dimensional echocardiographic imagesÔÇØ, Circulation (2005);112: pp. 1,161-1,170.
  4. Kuhl H P, Schreckenberg M, Rulands D, Katoh M, Schafer W, Schummers G, Bucker A, Hanrath P, Franke A, ÔÇ£High-resolution transthoracic real-time three-dimensional echocardiography: quantitation of cardiac volumes and function using semi-automatic border detection and comparison with cardiac magnetic resonance imagingÔÇØ, J.Am. Coll. Cardiol. (2004);43: pp. 2,083-2,090.
  5. Qin J X, Jones M, Shiota T, Greenberg N L,Tsujino H, Firstenberg M S, Gupta P C, Zetts A D, Xu Y, Ping S J, Cardon L A, Odabashian J A, Flamm S D,White R D, Panza J A,Thomas J D,ÔÇ£Validation of real-time three-dimensional echocardiography for quantifying left ventricular volumes in the presence of a left ventricular aneurysm: in vitro and in vivo studiesÔÇØ, J.Am. Coll. Cardiol. (2000);36: pp. 900-907.
  6. Caiani E G, Coon P, Corsi C et al.,ÔÇ£Dual triggering improves the accuracy of left ventricular volume measurements by contrastenhanced real-time 3-dimensional echocardiographyÔÇØ, J.Am. Soc. Echocardiogr. (2005), in press.
  7. Mor-Avi V, Sugeng L,Weinert L, MacEneaney P, Caiani E G, Koch R, Salgo I S, Lang R M, ÔÇ£Fast measurement of left ventricular mass with real-time three-dimensional echocardiography: comparison with magnetic resonance imagingÔÇØ, Circulation (2004);110: pp. 1,814-1,818.
  8. van der Heide J A, Mannaerts H F, Spruijt H J, van Campen L M, de Cock C,Visser C A, Kamp O,ÔÇ£Noninvasive mapping of left ventricular electromechanical asynchrony by three-dimensional echocardiography and semi-automatic contour detectionÔÇØ, Am. J. Cardiol. (2004);94: pp. 1,449-1,453.
  9. Ahmad M, Xie T, McCulloch M, Abreo G, Runge M, ÔÇ£Real-time three-dimensional dobutamine stress echocardiography in assessment of ischemia: comparison with two-dimensional dobutamine stress echocardiographyÔÇØ, J.Am. Coll. Cardiol. (2001);37: pp. 1,303-1,309.
  10. Sugeng L, Kirkpatrick J, Lang R M, Bednarz J E, Decara J M, Lammertin G, Spencer K T, ÔÇ£Biplane stress echocardiography using a prototype matrix-array transducerÔÇØ, J.Am. Soc. Echocardiogr. (2003);16: pp. 937-941.
  11. Takeuchi M, Shinichiro O,Weinert L, Spencer K T, Lang R M, ÔÇ£Comparison of contrast-enhanced real time live threedimensional dobumatine stress echocardiography with contrast two-dimensional echocardiography for detecting stress-induced wall motion abnormalitiesÔÇØ, J.Am. Soc. Echocardiogr. (2005), in press.
  12. Binder T M, Rosenhek R, Porenta G, Maurer G, Baumgartner H, ÔÇ£Improved assessment of mitral valve stenosis by volumetric real-time three-dimensional echocardiographyÔÇØ, J.Am. Coll. Cardiol. (2000);36: pp. 1,355-1,361.
  13. Zamorano J, Cordeiro P, Sugeng L, Perez de Isla L,Weinert L, Macaya C, Rodriguez E, Lang R M, ÔÇ£Real-time threedimensional echocardiography for rheumatic mitral valve stenosis evaluation: an accurate and novel approachÔÇØ, J. Am. Coll. Cardiol. (2004);43: pp. 2,091-2,096.
  14. Zamorano J, Perez de Isla L, Sugeng L, Cordeiro P, Rodrigo J L, Almeria C,Weinert L, Feldman T, Macaya C, Lang R M, Hernandez A R,ÔÇ£Non-invasive assessment of mitral valve area during percutaneous balloon mitral valvuloplasty: role of real-time 3D echocardiographyÔÇØ, Eur. Heart J. (2004);25: pp. 2,086-2,091.
  15. Kwan J, Shiota T,Agler D A, Popovic Z B, Qin J X, Gillinov M A, Stewart W J, Cosgrove D M, McCarthy P M,Thomas J D, ÔÇ£Geometric differences of the mitral apparatus between ischemic and dilated cardiomyopathy with significant mitral regurgitation: real-time three-dimensional echocardiography studyÔÇØ, Circulation (2003);107: pp. 1,135-1,140.
  16. Watanabe N, Ogasawara Y,Yamaura Y, Kawamoto T,Toyota E, Akasaka T,Yoshida K, ÔÇ£Quantitation of mitral valve tenting in ischemic mitral regurgitation by transthoracic real-time three-dimensional echocardiographyÔÇØ, J. Am. Coll. Cardiol. (2005);45: pp. 763-769.
  17. Kapetanakis S, Kearney M T, Siva A, Gall N, Cooklin M, Monaghan M J,ÔÇ£Real-time three-dimensional echocardiography: a novel technique to quantify global left ventricular mechanical dyssynchronyÔÇØ, Circulation (2005);112: pp. 992-1,000.
  18. Camarano G, Jones M, Freidlin R Z, Panza J A, ÔÇ£Quantitative assessment of left ventricular perfusion defects using real-time three-dimensional myocardial contrast echocardiographyÔÇØ, J.Am. Soc. Echocardiogr. (2002);15: pp. 206-213.
  19. Pemberton J, Li X, Hickey E, Karamlou T, Sandquist C A, Ungerleider R, Sahn D J, ÔÇ£Live real-time three-dimensional echocardiography for the visualization of myocardial perfusionÔÇöa pilot study in open-chest pigsÔÇØ, J. Am. Soc. Echocardiogr. (2005);18: pp. 956-958.
  20. Toledo E, Lang R M, Collins K A, Lammertin G,Willams U,Weinert L, Bolotin G, Coon P, Raman J, Jacobs L D, Mor-Avi V, ÔÇ£Imaging and quantification of myocardial perfusion using real-time three-dimensional echocardiographyÔÇØ, J. Am. Coll. Cardiol. (2005), in press.
Previous Volume Article Next Volume Article